Instruction Manual
Instruction Manual
7
1.7
Consultation method
The manual uses a specific typographical method. Various safety warnings have been defined.
1.1.1
Key to symbols
This warning indicates the possibility of damage to the electronic unit and for other devices that
it is connected to, or the possibility of losing data.
ATTENTION
This warning indicates conditions of risk for the operator or the technician.
ELECTRIC SHOCK RISK
Electric shock hazards
may be present when carrying out fault finding routines on live
components.
FIRE OR EXPLOSION RISK
The P1 cannot be used in location with the risk of explosion and/or fire (the P1 is not certified
pursuant to directive 94/9/EC ATEX).
DANGER OF CRUSHING
Proceed with caution when moving or handling the P1.
DANGER FOR THE ENVIRONMENT
Recycle and/or dispose pursuant to the applicable standards in the destination country.
NO SMOKING
Smoking is prohibited while installing the unit.
N.B.
Information that can make it easier to use and understand the system is enclosed in a text
frame, indicated by “N.B.” in bold.
INFORMATION
Information about the correct use of the machinery.
THE FINAL MACHINE DOCUMENTATION MUST BE READ
in order to ensure that the machinery is operated correctly.
WARNING – Area protected against ESD.
Observe the procedures for handling devices that are sensitive to electro-static discharges
To Next Page
Loading...