Masterflex MFLX77112-10 - Auto Start

2-9 Masterflex SS B/T Washdown Digital Pump Drive with Advanced Connectivity
Section 2: Basic Setup & Settings
Masterflex
Deleting a user:
NOTE:  ere must always be at least one ADMIN user. ADMIN users cannot delete their own user pro le.
1. Tap SETTINGS
from any of the mode screens.  e Settings Screen will be displayed.
2. SCROLL
through the Settings Screen pages to locate USER MANAGEMENT.
3. Tap MODIFY USER.
4. Locate the desired username from the available list and then tap the DELETE USER
icon located
next to the username.
5. Tap DELETE to delete user or CANCEL to cancel.
Editing an existing user:
1. Tap SETTINGS
from any of the mode screens.  e Settings Screen will be displayed.
2. SCROLL
through the Settings Screen pages to locate USER MANAGEMENT.
3. Tap MODIFY USER.
4. Select the desired username.
5. Edit as required.
6. Tap CONFIRM
to save or CANCEL to discard any changes.
Auto Start
 e B/T has an auto start that will resume pump operation when power is restored after a power outage.
To enable auto start:
1. Tap SETTINGS
from any of the mode screens.  e Settings Screen will be displayed.
2. SCROLL
through the Settings Screen pages to locate AUTO START.
3. Tap the AUTO START toggle to select either ON or OFF.