Masterflex MFLX77112-10 - Section 1: Introduction; Safe Operation

1-1 Masterflex SS B/T Washdown Digital Pump Drive with Advanced Connectivity
Section 1: Introduction
Masterflex
SECTION 1: INTRODUCTION
SAFE OPERATION
 e SS B/T Washdown Digital Pump Drive with Advanced Connectivity is designed for pumping and
dispensing applications in laboratory and process environments. Con rm that the pump drive is operated
only in the manner speci ed in this operating manual and that safe work practices and Good Laboratory
Practice (GLP) are followed. Misuse of the pump drive may compromise built-in safety protections and result
in injury and/or damage to equipment. Do not operate the pump drive with water on the surface of the
touchscreen.
 e following Safety Symbols are used in this documentation:
!
CAUTION: Risk of Danger. Consult Operating Manual for nature of hazard and corrective actions.
CAUTION: Risk of crushing. Keep  ngers away from the rotor while the pump is in operation.
Stop pump before loading or unloading tubing.
CAUTION: Hot Surface. Do not touch.
CAUTION: Risk of electric shock. Consult Operating Manual for nature of hazard and corrective
actions.
Please observe the following cautions and recommendations:
!
CAUTION: Do not operate the pump in a way that exceeds the designed operating and environ-
mental conditions outlined in this operating manual.
!
CAUTION:  e pump must not be used:
• As a medical device.
• In explosion proof chambers or in the presence of  ammable gases or fumes.
CAUTION:  e circuit between the mains power supply and the pump must be connected to
earth ground.
CAUTION: Turn the drive o before removing or installing tubing. Fingers or loose clothing
could get caught in the drive mechanism.
!
CAUTION: Do not open or remove the housing while the pump is operating.
!
CAUTION: Tubing can tear and burst during operation. It is the responsibility of the customer to
take the necessary precautions to avoid injury or damage to equipment.
!
CAUTION: It is recommended that any repairs be performed only by an authorized technician.
If service and repairs are performed by the customer or by any third party company, Master ex
denies all responsibility.