121 Matrix SETU VFXTH System Manual
Under Jeeves/FTP/Telnet,
• Enter Current Password.
• Enter New Password. All ASCII characters (except Percentage %, Hash #, Equal to =, Plus +, And &,
Backslash \, Less than <, Greater than >, Apostrophe ’ , Double Quote " and Space) and digits 0 to 9
are allowed. The new password must be:
• a minimum of 6 characters to a maximum of 16 characters.
• include atleast one upper-case, one lower-case, one number and one special character.
•In Confirm New Password, re-enter the new password to confirm.
• Click Submit button to save your new password.
• Password for Jeeves is case sensitive.
• When you default the system, Jeeves Password will not be set to default.
Login Password for System Commands
To configure system by dialing System Commands, you must enter the SE mode using the Command Password.
This Password must not be less than 4 digits and can be of upto 8 digits. Digits 0-9 are allowed. The default
Command Password is 1234. You may change this Password using Jeeves.
To change the Command Password:
• Log into Jeeves.
• Click the Basic Settings link to expand.
• Click Login Password.