Matrix SETU VFXTH System Manual

Matrix SETU VFXTH System Manual 222
Disconnecting a Call using Access Code
SETU VFXTH enables users to disconnect a call using an access code. When the call disconnect access code is
dialed, SETU VFXTH releases the port engaged in the call.
Configuring Call Disconnection using Access Code
To provide this feature to users, you must enable Allow Call Disconnection using Access code on the SIP
Trunks and FXO Ports. For instructions, under “Basic Settings”, see “FXO Port” and “SIP Trunks”.
How to Disconnect a Call using Access Code
• You are in speech or are at the end of the current call.
•Dial #92

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English