Matrix SETU VFXTH System Manual 224
CHAPTER 7
Maintenance
Firmware Upgrade
You can upgrade Firmware of SETU VFXTH:
1. From a Provisioning Server
2. From a Personal Computer
Firmware Upgrade from Provisioning Server
Auto Firmware Upgrade
Using Auto-Firmware Upgrade, SETU VFXTH can automatically upgrade its firmware by downloading the firmware
files stored at a central location: HTTP Server or HTTPS Server or Provisioning Server.
This feature is useful for ITSPs that have Provisioning Servers to store the firmware files. ITSPs can update the
firmware of SETU VFXTH provided to their customers from a centralized location without physically visiting the
customer premises.
For the Auto Firmware Upgrade File contact Matrix Support Team.
To perform Auto-Firmware Upgrade,
1. ITSPs must store the following Auto firmware upgrade files of SETU VFXTH on the Provisioning Server.
• matrix_firmware.html file
• SETU VFXTH_VxRy.Zip file
2. The following parameters must be configured in the SETU VFXTH.
• IP Address of the Provisioning Server.
• Path of the Folder (containing the firmware files) on the Provisioning Server.
• The protocol to be used: HTTP, HTTPS.
3. When SETU VFXTH installed at a customer site gets connected to the ITSP network, it will automatically
compare its current firmware with the firmware files stored on the Provisioning Server.
The matrix_firmware.html file helps SETU VFXTH decide which firmware it should upgrade to.
To Next Page
Loading...
Need help?
General
