Matrix SETU VFXTH System Manual

19 Matrix SETU VFXTH System Manual
Test Calls
After completing basic programming and switching on the system, make test calls.
Making an Outgoing Call:
To make an outgoing call to a remote SIP user from FXS Port, ensure that the Destination Port Determination
Method configured for the FXS Port is 'Fixed' and Routing Group configured is 'SIP Trunk'.
1. Pick up handset of the telephone instrument connected to FXS Port.
2. You will get a dial tone.
3. Dial 123@abc.com. The call will be routed to the dialed destination through the SIP Trunk.
4. Talk when the remote SIP user answers the call.
5. Replace the handset or dial Call Disconnect Access Code to disconnect the call.
Receiving an Incoming Call:
To receive an incoming call on SIP Trunk, ensure that Destination Number Determination Method configured for the
SIP Trunk is 'without any Destination Number' and Destination Port Determination Method selected is 'Fixed'.
Ensure that the Routing Group configured for calls received on the SIP Trunk is 'FXS Port'. When remote caller
calls SIP Trunk of SETU VFXTH, the call is routed to the FXS Port and the telephone instrument connected to that
FXS Port starts ringing.
1. Pick up handset of the telephone instrument connected to the FXS Port.
2. Talk
3. Replace the handset after the remote caller disconnects the call.

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English