Matrix SETU VFXTH System Manual

Matrix SETU VFXTH System Manual 80
SIP Trunks
SETU VFXTH supports thirty-two SIP Trunks. You can register all SIP Trunks with the same ITSP or with different
ITSPs. These SIP Trunks may be configured as Proxy or Non-Proxy i.e. Peer-to-Peer.
To configure a SIP Trunk,
• Click the Basic Settings link to expand.
• Click the SIP Trunk link.
• Click the SIP Trunk number tab, SIP 1 to SIP 32, you want to configure.
The SIP Trunk number page opens.
• Select the SIP Trunk check box to use the SIP Trunk. You may disable the SIP Trunk, if you do not want to
route calls through this trunk. Default: Disabled.
• You can assign a Name to the SIP Trunk for identification of this trunk. Default: Blank.
You may assign the name of the ITSP with which the trunk is registered, or any other name of your choice.
The name you assign to the SIP Trunk will appear on the display of the remote party’s phone when a call is
made through this Trunk.
• In the SIP ID field, the SIP ID that you assign under Registrar Settings will appear.

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English