Matrix SETU VFXTH System Manual

Matrix SETU VFXTH System Manual 146
Destination Number Determination
The process of routing calls originated on FXO Ports, FXS Ports and SIP Trunks to the destination port in SETU
VFXTH takes place in two steps:
• Determination of Destination Number
• Determination of Destination Port
SETU VFXTH supports different methods of determining the destination number for the calls originated on the FXO
Ports and SIP Trunks.
Destination Number Determination on SIP Trunks
For SIP Trunks, the system supports the following methods for Destination Number Determination:
• without any Destination Number
• to the Fixed Destination Number
• on the basis of Calling Party Number
• to the Called Party Number
To apply Destination Number Determination on the basis of Calling Party Number, you must configure the
Destination Number Determination: SIP-Calling Number Based table. When there is an incoming call on the
SIP Trunk, SETU VFXTH will match the Calling Party Number with the entries of the Calling Party Number Based
Table. If a match is found, the call is routed to the destination port.
To apply Destination Number Determination on the basis of DDI Number, you must configure the Destination
Number Determination: SIP-DDI Number Based table. When there is an incoming call on the SIP Trunk, SETU
VFXTH will match the DDI Number received in the SIP INVITE message with the entries of the DDI Number Based
Table. If a match is found, the call is routed to the destination port.
Destination Number Determination on FXO Ports
For FXO Ports, the system supports the following methods for Destination Number Determination:
• without any Destination Number
• to a Fixed Destination Number
• on the basis of Calling Party Number
• after Answering the Call and Collecting the Digits
To apply Destination Number Determination on the basis of Calling Party Number, you must configure the
Destination Number Determination: FXO-Calling Number Based table. When there is an incoming call on the
FXO Port, SETU VFXTH will match the Calling Party Number with the entries of the Calling Party Number Based
Table. If a match is found, the call is routed to the destination port.
Configuring SIP-Calling Number Based Table
• Log into Jeeves.
• Click the Advanced Settings link.

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English