Matrix SETU VFXTH - Page 152

147 Matrix SETU VFXTH System Manual
• Click the Destination Number Determination link.
• To configure the table for the FXO Port, click the FXO-Calling Number Based link.
• To configure the table for the SIP Trunk, click the SIP-Calling Number Based link.
The Calling Number Based Table page opens.
• Configure following parameters in this table:
• Enter the calling party numbers in the column Calling Numbers. Calling numbers may consist of a
maximum of 24 characters. All ASCII characters are allowed. Default: Blank.
• For each calling party number, enter a corresponding destination number in the column
Destination Numbers. Destination numbers may consist of a maximum of 24 characters. Digits 0
to 9, *, # and (.) dot are allowed. Default: Blank.
• Click Submit to save your entries.
• Click Default All to clear all the entries.