Matrix SETU VFXTH System Manual

Matrix SETU VFXTH System Manual 212
Call Waiting
When your phone is busy, the Call Waiting feature notifies you about another incoming call in the form of beeps.
The Call Waiting feature of SETU VFXTH allows you to:
• reject the waiting call.
• ignore the waiting call
• hold the current call and answer the waiting call.
• disconnect the current call and answer the waiting call.
To use any of these options, you may dial the respective Access Code.
• Call Waiting feature has priority over Call Forward-When Busy in call mature state i.e. when the FXS
Port is in speech with another port.
• Call Waiting feature does not apply:
• If Call Waiting feature is disabled.
• If Waiting Call is ignored.
• If already one Waiting Call is present.
• In Programming Mode.
• In Conference.
• In Remote Held condition.
• In Dial state, Routing state and in Disconnect state.
Configuring Call Waiting
To be able to hear Call Waiting Beeps as indication, you must enable Call Waiting in the Class of Service of the
FXS Ports. By default, this feature is disabled. For instructions on enabling features in the Class of Service of the
FXS Ports, see “FXS Port” under Basic Settings.
How to use Call Waiting
You can set/cancel Call Waiting from Jeeves and from the phone connected to the FXS Port.
To set or cancel Call Waiting from Jeeves,
• Log into Jeeves.
• Under Basic Settings, click the FXS Port link.
• Click the FXS Port on which you want to use this feature. The page of the selected port opens.

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English