Matrix SETU VFXTH System Manual

Matrix SETU VFXTH System Manual 30
Network Parameters
• Under Basic Settings, click the Network link. The Network Parameters page opens.
• Configure the following Network Parameters by clicking their respective links.
Connection Type
• Click Connection Type.
• As network connection type, select the IP Addressing Scheme used by your network to assign the WAN IP
address to the Ethernet Port: Static, DHCP, PPPoE. Default: Static.
• Static: If your network uses Static IP addressing, select Static and configure the following parameters.
• IP Address: Enter the IP Address you obtained from your Network Administrator for the Ethernet
Port of SETU VFXTH in this field. Make sure the IP Address does not conflict with that of any other
device on the LAN. Default: 192.168.1.100
• Subnet Mask: Enter the Subnet Mask you obtained from your Network Administrator for the
Ethernet Port in this field. Default: 255.255.255.0

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English