Matrix SETU VFXTH System Manual

Matrix SETU VFXTH System Manual 218
Hotline
The Hotline feature connects the FXS Port user immediately to a particular number, when the user goes Off-hook.
You can use Hotline to dial the number you call most frequently.
Let us understand how this feature works with an example,
• A is Sales Manager who frequently dials the number of the B, the Sales Coordinator.
• Instead of dialing B’s number each time, A sets Hotline on his phone.
• A configures B’s number as Hotline Number
• A can also set the Hotline Timer, i.e. the time after which B’s number should be dialed out. By default, the
Hotline Timer is set to 5 seconds.
• Whenever A goes Off-hook, SETU VFXTH plays dial tone and waits for the duration of the Hotline Timer.
• If A does not dial any digit during this Timer, on the expiry of the Timer, SETU VFXTH dials out B’s number.
Allowed-denied number logic is applied for the hotline number.
Configuring Hotline
To use this feature, you must enable Hotline in the Class of Service of the FXS Port. For instructions on enabling
features in the Class of Service of the FXS Port, see “FXS Port” under Basic Settings.
How to use Hotline
You can set/cancel Hotline from Jeeves and from the phone connected to the FXS Port.
To set or cancel Hotline from Jeeves,
• Log into Jeeves.
• Under Basic Settings, click the FXS Port link.
• Click the FXS Port on which you want to use this feature. The page of the selected port opens.

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English