Matrix SETU VFXTH - Soft Restart

Matrix SETU VFXTH System Manual 258
Soft Restart
If you need to restart SETU VFXTH, you may do it by
• pressing the Reset button.
or
• use Soft Restart from Jeeves.
When you restart the system, all active calls will be disconnected and the ports in use will be released. The system
configuration however, will not be affected.
To restart the system using the Reset button,
• Use a blunt pin to press and release the Reset button.
• Press the Reset button for less than 4 seconds, the system will restart.
To restart the system using Jeeves,
• Log into Jeeves.
• Click the Maintenance link.
• Click Soft Restart.
• An alert message will appear, “This will Restart System. Do you want to continue?”
• Click OK to restart the system.