293 Matrix SETU VFXTH System Manual
Disposal of Products/Components after End-Of-Life
Main components of Matrix products are given below:
• Soldered Boards: At the end-of-life of the product, the soldered boards must be disposed through e-
waste recyclers. If there is any legal obligation for disposal, you must check with the local authorities to
locate approved e-waste recyclers in your area. It is recommended not to dispose-off soldered boards
along with other waste or municipal solid waste.
• Batteries: At the end-of-life of the product, batteries must be disposed through battery recyclers. If there is
any legal obligation for disposal, you may check with local authorities to locate approved batteries
recyclers in your area. It is recommended not to dispose off batteries along with other waste or municipal
solid waste.
• Metal Components: At the end-of-life of the product, Metal Components like Aluminum or MS enclosures
and copper cables may be retained for some other suitable use or it may be given away as scrap to metal
industries.
• Plastic Components: At the end-of-life of the product, plastic components must be disposed through
plastic recyclers. If there is any legal obligation for disposal, you may check with local authorities to locate
approved plastic recyclers in your area.
After end-of-life of the Matrix products, if you are unable to dispose-off the products or unable to locate e-waste
recyclers, you may return the products to Matrix Return Material Authorization (RMA) department.
Make sure these are returned with:
• proper documentation and RMA number
• proper packing
• pre-payment of the freight and logistic costs.
Such products will be disposed-off by Matrix.
"SAVE ENVIRONMENT SAVE EARTH"
To Next Page
Loading...
