259 Matrix SETU VFXTH System Manual
TR-069
TR-069, also known as CPE WAN Management Protocol (CWMP), is a remote management protocol used for
secure communication between the Customer Premises Equipment (CPE) and an Auto-Configuration Server
(ACS) for various functionalities such as:
• Auto-configuration and dynamic service provisioning
• Firmware Management
• Status and performance monitoring
• Diagnostics
SETU VFXTH supports TR-069. Using TR-069, service providers can manage SETU VFXTH remotely for the
functions described above.
To configure TR-069 parameters,
• Log into Jeeves.
• Click the Maintenance link.
• Click the TR-069 link.
• Select the TR-069 Enable check box to use TR-069. Default: Disabled.
• In the ACS URL field, enter the URL of the ACS. SETU VFXTH will connect and send message to this
server address. Default: Blank.
• In the ACS Username field, enter the username used by SETU VFXTH for HTTP authentication.
Default: Blank.
To Next Page
Loading...
