Matrix SETU VFXTH System Manual

127 Matrix SETU VFXTH System Manual
•Set Time to 01:59:59
5. Now, go to the option DST End, and configure as follows.
• Select October as the Month.
• Select 30th as the Date.
•Set Time to 02:59:59.
6. Click Submit to save DST settings.
On Sunday 27 March at 01:59:59 the SETU VFXTH will set the clock forward by 1 hour. On Sunday 30 October,
SETU VFXTH sets the clock back by 1 hour at 02:59:59.
SNTP Settings
To use SNTP for synchronizing with the Real Time Clock,
• Under Basic Settings, click the Date and Time Settings link.
•Go to SNTP Settings on this page.
• In the SNTP Server Address field, enter the Time Server Address. The SNTP Server address can be of
maximum 40 characters. Default: Blank.
• By default, the time zone for the country/region where SETU VFXTH is installed is automatically selected
when you select ‘Region’. If required you may change the time zone by selecting the desired country/
region from the Time Zone list. Default: India (GMT+05:30).
• If you want the system to synchronize date and time with the SNTP server automatically at Power On,
select the Auto Date and Time Sync with SNTP during Power ON? check box.
At every power ON, SETU VFXTH will synchronize its date and time with the Time Server address you
have entered as SNTP Server Address.
By default, Auto Date and Time Sync with SNTP during Power ON is disabled.
• To synchronize date and time of SETU VFXTH with the SNTP server whenever required, click the Sync
Date and Time Server with SNTP button.
• Click Submit to save the changes.

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English