Matrix SETU VFXTH System Manual

Matrix SETU VFXTH System Manual 144
• The system dials the Add Prefix number string 160223 (number of the calling card server). It waits for the
calling card server to answer the call.
• When the call is matured, i.e. the calling card server has answered the call, the system dials the PIN
number 113212 and waits for the Pause Timer before dialing the destination number.
Thus, the user can directly dial the desired destination number and the system dials the rest using the ANT table.
Configuring Automatic Number Translation Table
• Under Advanced Settings, click the Automatic Number Translation (ANT) link.
The Automatic Number Translation Table page will open. In this table, you can store as many as 24 Numbers
at Index Numbers 01 to 24.
• In the Number column, enter the Called/Calling numbers that need to be modified. You can enter
maximum 24 digits. Digits 0-9, #, *, + and $ are allowed. Default: Blank.
To configure a range of numbers you can use the character $. Here, $ is any number from 0 to 9.
For example, if you want SETU VFXTH to add prefix ‘1’ to all 10 digit numbers dialed by the user,
configure Number as $$$$$$$$$$, Strip Digit as 0 and Add Prefix as 1. Now, when the user dials any
number between the range of 0000000000 to 9999999999, say 4161231234, the system will add prefix
1 to it and dials out the number as 14161231234.
• In the Strip Digit column, enter the number of digits you want the system to strip off from the Called/
Calling Number. You can configure from 00-24. Default: 00.

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English