Matrix SETU VFXTH System Manual

Matrix SETU VFXTH System Manual 154
CLI Number to be sent on Destination Port is applicable only when FXS Port or FXS Group is selected
as the Destination Port (Routing Group).
• Create the Routing Group.
• To create a group of sequential FXS Ports as members,
• Select the desired FXS Port numbers as members. Default: 1.
• In the in - order box, select the order in which the system should hunt for a free member FXS
Port to route the call.
To start hunting from the first to the last member FXS Port, select Ascending.
To start hunting from the last to the first member FXS Port, select Descending.
Default: Ascending.
• To create a group of not-sequential FXS Ports as members,
• Select an FXS Group.
• Select FXS Group number. Default:1.
• Click Settings . The FXS Groups window opens. Create the FXS Group. For detailed
instructions, see “Group”.
• Similarly, you can create group of sequential and not-sequential FXO Ports, SIP Trunk and Mobile
Ports as members.
• You may create the Fallback Routing Group. To do this,
• Select the Apply check box.
• Follow the same instructions provided earlier to create sequential and not-sequential groups of FXS
Ports, FXO Ports, SIP Trunks and Mobile Ports.
• Click Submit to save changes. The Add Entry window closes.
• The entry you added appears in the FXS Port - Destination Port Determination - Destination
Number Based window.
To edit the Routing Group and/or the Fallback Routing Group, do the following:
• Under Edit, click Settings .

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English