Matrix SETU VFXTH System Manual

195 Matrix SETU VFXTH System Manual
Setting Filters
• To set filters, click the Filters link under Call Detail Record.
By default, all the filters are enabled. You may disable the filter you do not want to use by clearing the
related Apply Filter check box.
Some of these filters are enabled by default, you cannot disable them, but you can set them.
• Set the following filters as required:
The filters you set are not applied on the downloaded report. The CSV and TXT files will contain all the
records, without filters.
• Calls originated from FXS Ports: The system will generate report of calls that originated from FXS
Ports, i.e. calls that were received on the FXS Ports of SETU VFXTH for further routing. To generate
report using this filter for both FXS Ports, set the range of the FXS Ports in the From and To fields.
You can also generate report for a single FXS Port, by setting the same port number in the From and
To fields.
• Calls originated from SIP Trunks: The system will generate report of calls that originated from SIP
Trunks, i.e. calls that were received on the SIP Trunks of SETU VFXTH for further routing. To generate
report using this filter for a range of SIP Trunks, set the range of the SIP Trunks in the From and To
fields.
You can also generate report for a single trunk, by setting the same trunk number in the From and To
fields.
• Calls originated from FXO Ports: The system will generate report of calls that originated from the
FXO Ports. Set the range of the FXO Ports in the From and To fields.

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English