247 Matrix SETU VFXTH System Manual
• Idle, when the port is enabled and is currently in use, but there is not call present on this port currently.
• Active, when the port is enabled, in use and a call is present on the port.
• In the State column, the port states of Active ports are displayed as:
• Dial, when the port is in Dial state, i.e. the call has been answered by the system or the FXS Port is Off-
hook but no called party number is received.
• Call in Progress, when the destination Number is outdialed on the destination port (except FXS Port)
• Speech, when source port and destination port are in speech.
• Ringing, when Ring event is detected on FXS Port.
• Incoming Call Proceeding, when Ring event is detected on FXO or SIP Trunk.
• Remote Held, when Hold message is received on SIP Trunk or the FXS Port has put the call on Hold.
• Error, when the other party disconnects the call.
As multiple calls are supported on SIP Trunks, the status and state of each call will appear.
• You may log out of Jeeves.