265 Matrix SETU VFXTH System Manual
The following information related to Auto-Configuration upgrade will appear on your screen.
• Last Upgraded On: This field displays the date (DD:MM:YYYY) and time (HH:MM), when SETU
VFXTH last upgraded its configuration through the server.
• Next Upgrade On: This field displays the date (DD:MM:YYYY) and time (HH:MM), when SETU
VFXTH will again check for new configuration on the server.
• Last time when Synchronized with Server: This field displays the date (DD:MM:YYYY) and time
(HH:MM), when SETU VFXTH last resynchronized with the server for new configuration.
• Status of Last Synchronization: This field displays the status of last synchronization. The possible
status messages that may appear are listed in the table below.
Possible Responses Event
Invalid Parameters When parameters are not valid.
Local Failure When internal error occurs, like Thread Creation failed.
Resolving Server Address When IP Address is not found using DNS query.
Server Not Found
When server is not connected after the expiry of Retry
Timer and Retry Counter.
Send Request Failed When there is Curl Internal Error
Connecting to Server When system is establishing TCP connection with server
until the expiry of Retry Timer and Retry Counter.
TCP/TFTP Connection Failed When no response is received for TCP/TFTP connection
until expiry of Retry Timer and Retry Counter.
Connection Failed When no response is received for TCP connection after
expiry of Retry Timer and Retry Counter.
When there is an open SSL error.
When the maximum file size is exceeded.
When there are too many Redirect or illegal operation from
curl response.
Permission Denied When access is denied.
When there is permission problem on the server.
When login fails.
Downloading Config File When the system is retrieving config file.
File Not Found When the remote file is not found.
Config Decryption Failed When the config decryption has failed.
Config Parsing Failed When the file parsing has failed.
When the root tag is not found.
Successfully Updated When configuration is updated successfully.