Matrix SETU VFXTH - Page 43

Matrix SETU VFXTH System Manual 38
Call Pick-up allows the FXS Port user to answer calls ringing on the FXS Port in the same Pick-up Group,
by dialing an access code. To know more about this feature, see “Call Pick-Up”.
You can assign the Port to any group from 1 to 8. Default: 1
Make sure that the Call Pick-up feature is included in the Class of Service of all FXS Ports in the group.
See “Class of Service” later in this topic.
‘0' is used to de-assign an FXS Port from a Call Pick-Up Group.
• You can apply Automatic Number Translation (ANT) logic on the outgoing calls made from the FXS Port.
• To apply ANT logic on the Calling Numbers, click the Automatic Number Translation (ANT) for
Calling Number check box. Default: Disabled.
• In the Use Automatic Number Translation Table, select the ANT Table number you have configured
for the Calling Numbers. Default: Table 5.
If you have not configured the Automatic Number Translation Table,