Matrix SETU VFXTH System Manual

59 Matrix SETU VFXTH System Manual
Handling of Incoming Calls
• Click Handling of Incoming Calls.
• If you do not want to route calls received on this FXO Port, select the Block all calls received on this
FXO Port check box. Default: Disabled.
Destination Number Determination
Select the desired destination number determination method for routing incoming calls with and without CLI.
•To Route all Incoming calls (with CLI), you may select from any of the following methods.
• without any Destination Number
• to the Fixed Destination Number
• on the basis of Calling Party Number
• after Answering the Call and Collecting the Digits
Default: without any Destination Number
If the destination number to be dialed out is an IP Address, SETU VFXTH will not check the Destination
Port Determination Method. Instead, it will route the call using the SIP Trunk / Group programmed for IP
Dialing. (See “IP Dialing” to know more).

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English