Matrix SETU VFXTH System Manual

Matrix SETU VFXTH System Manual 94
Route to the Fixed Destination Number
In this method, calls received on the SIP Trunk are routed to a fixed destination number configured for the SIP
Trunk.
To apply this method, do the following:
• In the Route all Incoming calls with CLI list, click to a Fixed Destination Number.
• In the Fixed Destination Number box that appears, enter the desired destination number. The
Destination Number may consist of a maximum of 24 digits. Valid digits are 0 to 9, *, # and (.) dot. Default:
Blank.
• Click Submit to save the changes.
Route on the basis of Calling Party Number
In this method, a call received on the SIP Trunk is routed to a specific number, as per the calling party's number.
You must configure the calling party numbers in the Calling Party Number Based Table. When there is an incoming
call on the SIP Trunk, SETU VFXTH will match the CLI of the number received with the entries of this table. If a
match is found for the number in the table, the call is routed to the destination port.
To apply this method, do the following:
• In the Route all Incoming calls with CLI list, click on the Basis of Calling Party Number.

Matrix SETU VFXTH Specifications

General

Brand	Matrix
Model	SETU VFXTH
Category	Gateway
Language	English