Matrix Visionpro System Manual

Matrix VISIONPRO System Manual 98
• Alternate Number Dialing also works with “Abbreviated Dialing”. For example, a station user dials the
abbreviated code 8100, and the dialed out number is busy. When the station user sets Redial or Auto
Redial, the VISIONPRO will try the alternate numbers related to 8100.
• Alternate number is allowed to all the stations.
• Stations not having access to Global Directory can also use Alternate Number dialing.
How to configure
To use Alternate Number Dialing, you must do the following:
1. Make a list of numbers to be programmed as the Alternate Numbers.
2. Create Alternate Number Groups.
3. Configure Alternate Number Groups in the Global Directory using command 1303.
If you write down the numbers on a piece of paper, the Global Directory after assigning Alternate Group Numbers
would appear as shown below,
To configure Alternate Number Groups in the Global Directory,
• Enter SE mode.
• To assign an Alternate Group Number, dial,
1303-1-Index-Alternate Group Number
Where,
Index is from 10 to 99. It is the Global Directory Index number.
Alternate Group Number is from 00 to 99.
• To clear all the Alternate Group Numbers, dial,
1303-*-#
• Exit SE mode.
Example: Program the system to fulfil the following requirements:
• ABC Ltd. has five telephone numbers - 2640075, 2640076, 2640077, 2635151 and 2635173.
• XYZ Ltd. has three telephone numbers - 2788856, 2788896, 2788857.
Step 1
Make a table as shown below on a piece of paper,
Index Main Number TAG Alternate Number Group
10 022281110001 0 00
11 022234567890 3 00
12 022281110002 0 00
: : : :
: : : :
98 0332987654321 2 01
99 033298765432 4 01
Index Number TAG Alternate Number Group
10 2640075 0 00

Matrix Visionpro Specifications

General

Brand	Matrix
Model	Visionpro
Category	PBX
Language	English