Matrix Visionpro

Matrix VISIONPRO System Manual 80
CHAPTER 7 Configuring Operator
In the context of a PBX, users understand the term 'Operator' as a person who handles multiple simultaneous calls
and functions as the link between the callers and the called parties.
VISIONPRO allows any station to be assigned as the Operator.
How it works
When any station presses ‘9’, the system diverts the call to the operator station.
How to configure
• Enter SE mode.
• To configure a station as the Operator, dial,
1101-Station
Where,
Station is the software port number which varies from 00 to 07.
By default, Operator station is assigned to the phone connected to software port number 00.
• Exit SE mode.
Example:
Program station 28 (software port 07) as the operator.
Solution. Dial, 1101-07 in SE mode.