193 Matrix VISIONPRO System Manual
Selective Trunk Access
VISIONPRO supports three trunk lines
10
. The station user can access a particular trunk by dialing a Trunk Access
Code. VISIONPRO provides the facility to assign a Trunk Access Code to grab a single trunk or any free trunk from
a group of trunks (also known as the Trunk Access Groups).
It is possible to configure Trunk Access Groups containing only one trunk. Thereby, it is possible to access a
particular trunk by dialing the assigned Trunk Access Code.
For example, the default configuration in the system allows you to access the first trunk (L1) by dialing 61, the
second trunk (L2) by dialing 62 and the third trunk (L3) by dialing 63. Refer “Trunk Access Groups (TAGs)” for
further details.
How to use
• Lift the handset.
•Dial 61 or 62 or 63
• You get Dial Tone of the trunk.
• Dial the desired external number.
By default, any of the free trunks can be accessed by dialing TACs ‘0’ or ‘5’.
10. Total number of supported trunks will differ according to the VISIONPRO variant.
To Next Page
Loading...
Need help?
General
