123 Matrix VISIONPRO System Manual
Call Park Timer
It is the time after which the call returns back to the station that parked the call.
To configure,
• Enter SE mode.
•Dial 3015-Timer.
Where,
Default: 045 seconds.
Range: 000 to 255 seconds.
• Exit SE mode.
How to use
To park a call when you are in speech with a station/trunk,
•Dial Flash.
• You get Feature Tone.
•Dial 7.
Call is parked.
To retrieve the parked call,
• Lift the handset.
• You get Dial Tone.
•Dial 17.
You are connected to the station/external caller.
To Next Page
Loading...
Need help?
General
