Matrix Visionpro System Manual

Matrix VISIONPRO System Manual 146
By default, CLI based routing is disabled during Night time.
• To configure the incoming telephone numbers in a CLI table, dial,
1604-1-Index-Telephone Number-#*
Where,
Index is from 00 to 24.
Telephone Number is the calling party’s telephone number (Maximum 16 digits). Terminate the command
with ‘#*’ if the number has less than 16 digits. Old telephone numbers can be overwritten by new
telephone numbers.
• To clear all telephone numbers from the CLI table, dial,
1604-*-#
• To assign destination type and destination for the incoming telephone numbers in the CLI table, dial,
1605-1-Index-Destination Type-Destination
Where,
Index is from 00 to 24.
• To assign the same destination type and destination for all the incoming telephone numbers in the CLI
table, dial,
1605-*-Destination Type-Destination.
• To configure the external destination number where the call is to be routed for CLI based Call Forward -
Trunk, dial,
1606-1-Index-Destination Number-#*
Where,
Index is from 00 to 07.
Destination Number is the telephone number (maximum 16 digits) where the calls are to be forwarded.
Terminate the command with ‘#*’ if the number has less than 16 digits.
On using above command a table shown below will be created in the system’s memory automatically.
Destination
Type
Meaning
0 If call is to be routed to particular station
1 If call is to be routed to a station group
2 If call is to be routed to external number
Destination Meaning
00-07 Port Number of the station
00-15 Station Group
00-07 Trunk Access Group Number
Index Caller’s Telephone Number Destination Type Destination Call Forward - Trunk Destination
00 022-8585858 2 0 2656565
01 011-7575757 2 0 2782085
02 020-5889988 2 0 2662266
:: :: :
:: :: :
07 033-5656565 0 0

Matrix Visionpro Specifications

General

Brand	Matrix
Model	Visionpro
Category	PBX
Language	English