Matrix Visionpro System Manual

Matrix VISIONPRO System Manual 154
728 in both cases. Such combinations are not allowed. VISIONPRO will not allow programming of the
same name or names with common codes.
• The caller should have a telephone instrument with alphabets printed on the keys.
• VISIONPRO checks the dialed station name for its validity. If the dialed number is not valid, it plays
wrong dial message and asks the caller to dial again.
How to configure
1. Program the station names using the command 4103.
2. Activate Voice Guidance on the trunks.
To configure,
• Enter SE mode.
• To configure a station name, dial,
4103-1-Station-Name
Where,
Station is the software port number of the station from 00 to 07.
Name is the alphanumeric string of three characters.
• To clear a station name, dial,
4103-1-Station-#
Where,
Station is the software port number of the station from 00 to 07.
• To clear all the station names, dial,
4103-*-#
• To activate Voice Guidance on the trunks, refer “Direct Inward Dialing (DID)” and “Voice Message
Applications”.
• Exit SE mode.
12
3
7
5
6
8
9
*
0
#
4
.

Matrix Visionpro Specifications

General

Brand	Matrix
Model	Visionpro
Category	PBX
Language	English