Matrix Visionpro - Page 174

Matrix VISIONPRO System Manual 168
• To set the flexible numbers of all the stations to their default values, dial,
4201-*-#
The default flexible numbers assigned to the system is shown in the following table-
• To clear the flexible numbers of all the stations, dial,
4201-*-0
• Exit SE mode.
Example:
Software port 00 to 03 should be assigned flexible numbers as 31 to 34 and software port from 04 to 07 should be
assigned flexible numbers as 21 to 24.
Solution. Dial the following commands in SE mode,
4201-1-00-31#*
4201-1-01-32#*
4201-1-02-33#*
4201-1-03-34#*
4201-1-04-21#*
4201-1-05-22#*
4201-1-06-23#*
4201-1-07-24#*
Software Port Flexible Number
00 21
01 22
02 23
03 24
04 25
05 26
06 27
07 28