Matrix Visionpro System Manual

Matrix VISIONPRO System Manual 172
How to use
Hotline can be set/canceled by users for their own station.
To set Hotline on a station (Hotline - Internal),
• Lift the handset.
•Dial 153 - Station Number.
• You get Confirmation Tone.
• Replace the handset.
Example:
The boss needs to speak to the secretary (station number 22) many times in a Day. He/she can avoid repeated
dialing by activating the Hotline Internal feature on his/her station: 153-22.
To set Hot Outward Dialing (Hotline - Trunk),
• Lift the handset.
•Dial 151 - Trunk Access Code.
• You get Confirmation Tone.
• Replace the handset.
Example:
To simulate dialing of Trunk Access Code 62 on lifting the handset, dial 151-62.
To set Hot Outward Dialing with Number (Hotline - External Number),
• Lift the handset.
•Dial 152-Trunk Access Code- Number-#*. Terminate the ‘Number’ by ‘#*’ only if it is less than 16 digits.
• You get Confirmation Tone.
• Replace the handset.
Example:
Activate Hotline for external number 0265 2630555 with Trunk Access Code ‘62’.
Solution. Dial following command to set this feature: 152-62-02652630555-#*
To set the Hotline Timer,
• Lift the handset.
•Dial 154 - Seconds.
• You get Confirmation Tone.
• Replace the handset.
The default value of Hotline Timer is 3 seconds and valid range is 2-9 seconds.

Matrix Visionpro Specifications

General

Brand	Matrix
Model	Visionpro
Category	PBX
Language	English