Matrix Visionpro System Manual

183 Matrix VISIONPRO System Manual
if for area code 022, the services of TATA are the cheapest followed by Hughes, BSNL and Reliance, then the first
row in the table would appear as shown in it.
• To configure Number Index, dial,
3422-1-Number Index-Number String-#*
Where,
Number Index is from 0 to 9.
Number string can be a complete telephone number or a truncated telephone number or an area code.
Number string is of maximum 16 digits and if it has less than 16 digits, then it must be completed with ‘#*’.
By default, no number string is programmed in Number Index.
The number string table looks like:
• To configure the Service Provider (SP) sequence for the each number index, dial,
3423-1-Number Index-SP0-SP1-SP2-SP3
Where,
Number Index is from 0 to 9.
SP0: Cheapest Service Provider.
SP1: Cheaper Service Provider.
SP2: Cheap Service Provider.
SP3: Costly Service Provider.
It is mandatory to complete this command. If less number of service providers are used, then repeat the
cheapest Service Provider for remaining SPs.
• To default the Number based LCR table, dial,
3421-*-#
The default Number based LCR table would look like:
When a call is placed to such a number which is not configured in the Number based LCR table (that is, no
matching Number String is found for the dialed number string), the system routes the call according to the
first Number Index entry configured (that is, Number Index 0).
Number Index Number String
0 (16 Digits Allowed)
1 (16 Digits Allowed)
::
8 (16 Digits Allowed)
9 (16 Digits Allowed)
Number
Index
Service Provider in hierarchical order of
increasing cost
Blank 0 1 2 3
Blank 0 1 2 3
: ::::
Blank 0 1 2 3

Matrix Visionpro Specifications

General

Brand	Matrix
Model	Visionpro
Category	PBX
Language	English