Matrix Visionpro System Manual

Matrix VISIONPRO System Manual 208
Configuring the Companding Type
• Enter SE mode.
•Dial, 1108-Code
Where,
Default code is 0.
• Exit SE mode.
Displaying the System’s Version and Revision
• Enter SE mode from a station having the CLI support.
•Dial, 1110
• You get the Confirmation Tone.
• Replace your handset.
• You get an incoming ring and the system’s version-revision is displayed on the LCD of the station. The
display format of system’s version-revision varies depending on the CLIP Type set for the station.
• If programmed CLIP Type for the station is DTMF, display format is “<Version No><Revision No>”. For
example, “0101”.
• If programmed CLIP Type for the station is either FSK-V.23 or FSK-BellCore, display format is
“V<Version No>R<Revision No>”. For example, “V01R01”.
• Exit SE mode.
Code Companding Type
0A-law
1 -law

Matrix Visionpro Specifications

General

Brand	Matrix
Model	Visionpro
Category	PBX
Language	English