Matrix Visionpro

Matrix VISIONPRO System Manual 214
CO (Central Office) / Two-Wire Trunk (TWT)
Power Supply
Mechanical
Environment
REN 3
CLI Reception DTMF, FSK ITU-T V.23 and FSK Bellcore 202
Protection Over Voltage Secondary Protection
Physical Connector 2.54mm Push Type Connector
Signaling Loop Start
Loop Limit 1200
Off Hook AC Impedance 600/900/Complex
Pulse Dialing 10/20 PPS
DTMF Dialing and Reception ITU-T Q.23 and Q.24
Return Loss >18dB
Longitudinal Balance >50dB
Transmission Level Adjust Tx Gain: -15dB to +10dB, Rx Gain: -15dB to +10dB
CLI Reception DTMF, FSK ITU-T V.23 and FSK Bellcore 202
Call Maturity Delay and Polarity Reversal
Protection Over Voltage and Over Current Secondary Protection
Physical Connector 2.54mm Push Type Connector
Input
External Adapter 12V@2A for VISIONPRO 206, 308, 412
Dimension (W x D x H)
231.00 x 162.5 x 55.00 mm
Weight 0.65kg (Unit Weight) including CPU Card and Enclosure
Operating Temperature
0° to 45°C
Operating Humidity
95% RH, Non-condensing
Storage Temperature - 20 Degree to +70 Degree
Storage Humidity 0 - 95% RH, Non-Condensing