Matrox Extio 3 Series – User Guide 25
Extio N3408 or N3208 unit
LED color Power LED Status LED
Green (solid) Driver is ready. Software is ready.
Green (slow blink) Device is restarting. —
Green (fast blink) Configuration reset in process. —
Amber (solid) Device is in maintenance mode. Device is restarting.
Amber (slow blink)
Device is restarting and is in
maintenance mode.
Firmware mismatch detected.
Amber (fast blink) Device is updating the firmware.
Transmitter – No USB
connected.
Receiver – No keyboard
detected.
Red (solid) —
Transmitter – No source
detected.
Receiver – No monitor
detected.
Red (slow blink) — No network detected.
Red (fast blink) Error detecting the driver. Fatal error occurred.
Black (no LED)
No power. Make sure your device
is properly installed. Also, make
sure your system isn’t in power
saving mode (see “Connecting
your Extio 3 devices”, page 14).
For more information, contact
your vendor (see “Customer
support”, page 57).
—
To Next Page
Loading...
