Matrox Extio 3 Series – User Guide 7
Overview
Thank you for purchasing a Matrox Extio 3 Series product. Matrox Extio 3 is an IP KVM extender
that enables you to work on a computer from a distance. It captures the peripheral signals from the
computer (such as the keyboard, video, mouse, audio, and other peripherals) and extends these
signals to a remote location.
Matrox Extio N3408 IP KVM extenders support up to four (4) monitors. Matrox Extio N3208 IP
KVM extenders support up to two (2) monitors.
Hardware supplied
*
Depending on your Extio 3 device, the following hardware is supplied:
Extio N3408 or N3208 transmitter card
– Transmitter card, 1 USB cable (A to mini B
connectors), RJ45 transceiver.
Extio N3408 or N3208 transmitter unit
– Transmitter unit, 1 USB cable (A to B
connectors), 1 power supply.
Extio N3408 or N3208 receiver unit
– Receiver unit, 1 power supply.
On-screen display (OSD)
Extio OSD –
to manage and use your
point-to-point
Extio 3 devices through an
On-Screen Display (OSD). If your Extio 3 devices are
networked
, you can use the OSD
to log into to your receiver and switch to different transmitters. The OSD is available only
on your receiver device.
Software available
Extio Central Manager –
to remotely manage, monitor, and configure your
networked
Extio 3 devices. For more information, see “Installing Matrox Extio Central Manager
software”, page 37.
* The hardware supplied with your Matrox product may vary depending on the SKU or part number of your product. For more
information, contact your Matrox representative.
To Next Page
Loading...
