8 Matrox Extio 3 Series – User Guide
Hardware required (sold separately)
Depending on your device and setup, you may need the following hardware:
CAT5e, CAT6, or CAT7 cable
LC-LC fiber optic cable
Multi-mode (62.5/125 µm (OM1), 50/125 µm (OM2, OM3, or OM4))
Single-mode (9/125 µm (OS1 or OS2))
Shielded DisplayPort™ 1.1 or 1.2 cable
*
Optional hardware (sold separately)
You may also need any of the following hardware:
Multi-mode fiber optic transceiver
†
Single-mode fiber optic transceiver
†
Mini DisplayPort to DisplayPort adapter
‡
Analog audio cable
Matrox secure cable solution
Matrox rack mount kit
Matrox makes available a rack mount kit to mount your Extio devices. To purchase a Matrox rack
mount kit, contact your Matrox representative.
* Shielded DisplayPort™ 1.2 cable is required for 4K60 resolutions.
† To purchase a multi-mode fiber optic transceiver (part number XTO3-SFPMM) or single-mode fiber optic transceiver (part
number XTO3-SFPSM) for your Matrox product, contact your Matrox representative.
‡ Not recommended for 4K60 resolutions.
To Next Page
Loading...
