Matrox Extio N3408 - Updating Firmware (Point-to-Point Mode); Download and Extract Package; Run Host Updater; Update Firmware

Matrox Extio 3 Series – User Guide 31
7 Update the firmware
When you’re done adding Extio 3 devices to the list of devices you want to update, click
Update . Wait while the devices are being updated (up to 20 minutes).
For more information on the device update process, click Show log ( ) at the bottom of
the program window.
Updating your Matrox Extio 3 firmware (point-to-point mode)
You can update the firmware of a single Extio 3 transmitter or of an Extio 3 transmitter and receiver
pair (in point-to-point mode) using the USB connection between your host system and transmitter
unit.
1 Download and extract the firmware package
Download the latest firmware package and extract the files to a local folder (for example,
C:\Extio3FirmwareUpdate ) on your host system (the system connected to your Extio 3
transmitter). If you don’t select a local folder, the files will automatically extract to
C:\Matrox .
2 Run the Updater from host file
On your host system, browse to the folder containing the extracted files, then run the
Updaterfromhost.exe file.
3 Update the firmware
Make sure the devices you want to update are listed in the program window. Devices that
require an update are listed with a green status bar.
Click
Update to update your devices. Wait while the devices are being updated (up to 20
minutes).