24 Matrox Extio 3 Series – User Guide
Description of LEDs
The LED on your Extio 3 device provides information to help you troubleshoot your Extio 3 product.
The following describes the LED on your Extio 3 device.
Power/status LEDs
The LEDs on your device provide information on the power and status of your device.
Extio N3408 or N3208 transmitter card
LED color Status LED
Green (solid) Driver is ready.
Green (fast blink) Configuration reset in process.
Amber (solid) Card is in maintenance mode.
Amber (slow blink) Card is restarting in maintenance mode.
Amber (fast blink) Device is updating the firmware.
Red (solid) No source detected.
Red (slow blink) No network detected.
Red (fast blink)
Device has detected a fatal error. Try rebooting your device. If,
after rebooting your device, the LED is still red, contact your
vendor for technical support (see “Customer support”, page
57). For more information on rebooting your Extio 3 device, see
“Rebooting or resetting your Extio 3 device”, page 41.
To Next Page
Loading...
