Matrox Extio 3 Series – User Guide 19
Extio N3208 transmitter or receiver unit
Extio N3208 transmitter unit (Front)
RS232 99
To control an RS232 device on one of your devices with an RS232
controller connected to device, or with an RS232 controller
sending commands over the network.
If your RS232 device has a DB25 connector, use a DE9 (also
known as a DB9) to DB25 converter to connect your device to
this connector.
USB 2.0 99Connect a USB device to this connector.
Connector
Tx
Rx
Description
Video Out
(DisplayPort 1.1)
USB 2.0