Matrox Extio N3408 - Page 45

Matrox Extio 3 Series – User Guide 45
2
Cause Windows Server 2016/2012 R2/2008 R2 only – The Windows SSDP Discovery service may
be disabled on your system.
1
Solution Make sure the SSDP Discovery service is enabled on your system.
3
Cause Network discovery and file sharing may not be enabled on your system.
1
Solution Enable network discovery and file sharing on your system.
4
Cause The firewall for your system or for your network may be enabled and may prevent
communication with your Extio devices.
1
Solution Make sure your firewall is properly configured to allow the necessary communication
between your Extio devices and the various networked components. For more information,
see “Appendix B – Firewall requirements”, page 52.
Problem Random display flickering occurs while using a point-to-point
connection
1
Cause Your video output is unstable, or you may be using a fixed frequency monitor.
1
Solution Point-to-point mode only – In the OSD, click Settings Æ Audio/Video Æ Monitors . Make
sure the
Stabilize display output option is enabled.