MAVIG CT Expres

To Next Page

To Previous Page

Page 19 of 54 5100054 BND01O03.docx

Figure 10 Graphical display of the system in maximum dimensions configuration, considering

maximum load to be attached to the injector column.

Main Page

Table of Contents3
Symbols and Definitions6
Use and Ready Availability of the User Instructions6
Warranty6
Safety Instructions8
Transport, Storage and Operational Conditions9
When in Operation9
Initial Commissioning10
Standards10
Transport and Storage10
Component Description11
Product Specification11
Specified Use11
Cables12
- Service Life13
- Information on the Identification Label13
- Manufacturer and Contact Information16
- Customer Care and Service16
- Packaging16
- Installation17
- Tools Required for Assembly17
Canopy12
Ceiling Column12
Connection Plate12
Extension Arm12
Injector Column12
Spring Arm12
Installation of Ceiling Column18
Substructure TS1524 (Optional)18
Installation of the Extension Arm21
Installation of the Spring Arm22
Assembly of the Injector Holder23
Installation of the Injector Holder24
Installation of Injector with Handle25
Cable Routing26
Installation of Connection Plate28
Installation Grounding Cable29
Adjusting the Spring Force30
Adjust the Upward Height Stop Point31
Adjusting the Rotation End-Stop at Axis a32
Adjusting the Brakes for the Extension Arm33
Adjusting the Brakes for the Injector Column33
Adjusting the Brakes for the Spring Arm33
Adjusting the Friction Brakes33
Installation/Disassembly of Extension Arm Covers34
Front Spring Arm Cover Panels35
Installation/Disassembly of Socket Covers35
Installation/Disassembly of Spring Arm Covers35
Cover Plates ⑦/⑯36
Decorative Spring Arm Covers ④36
Rear Spring Arm Cover Panels ⑫36
Side Panels37
Installation of Canopy38
Maintenance39
Maintenance Check List39
Checking the Securing Elements for Axis B42
Checking the Securing Elements on the Spring Arm43
Checking the Securing Ring at Axis44
- Lubricating the Brake Screws45
Lubricating the Brake Screws for the Extension Arm45
Lubricating the Brake Screws for the Injector Column45
- Disposal46
- Technical Description47
- Ceiling Column Length47
- Weights48
- Dimensions48
- List of Spare Parts49
- Spare Part Replacement52
- Extension Arm52
- Injector Holder52
- Spring Arm52
- Canopy52
- Connection Plate52
- Spring Arm Side Panels52
- Spring Arm Rear and Front Covers52
- Cover Plates52
- Lubricant Microgleit GP 36053
Lubricating the Brake Screws for the Spring Arm45
Brake Screws for Axis a53
Brake Screws for Axis B and C53
Extension Arm Covers for Axis a53
Extension Arm Socket Covers53
Installation Kit TS152X53
Securing Element for Axis a53
Securing Element for Axis C53
Securing Elements for Axis B53

MAVIG CT Expres - Page 19

Table of Contents

Related product manuals