Maxeon SunPower Drive - Unpacking List

© 2023 Maxeon Solar Technologies, Ltd. All rights reserved. | 549549 Revision A - October 2023
Specications included in this document are subject to change without notice
13
5.2. Unpacking list
No. Device Qty.
1 SunPower Drive Charging station 1
2 Rear cover & Inlet seal assembly
Rear cover 1
Sealing joint strip 1
Cable inlet rubber plug 1
3 Plastic cable clamp 1
4 Mounting template with Quick Install Guide 1
5 4-6mm² RV5-4 Ring terminals 3
6 6mm² E6012 Cable Ferrules 3
7 Mounting accessory
Mounting bracket 1
M6 x 50mm self-tapping screw (1 spare) 5
8mm x 60mm plastic expansion tube / wall anchor plug (1 spare) 5
M6 x 12mm torx screw (1 spare) 3
M4 x 12mm cross combination screw (1 spare) 9
8 M4 x 13.9mm screw-clamp (1 spare) 6
9 SunPower RFID authentication cards 2
10 QC Certicate 1
11 Earth terminal 1
12 Incoming protection sleeve 1