McHale Orbital Round Bale Wrapper
70
9
Road traffic safety & operation
9.1 Before travelling on any public roadway
The following should be inspected every time, before travelling on a public road:
All bales, wrapped or unwrapped, should be unloaded from the machine.
Press the transport position soft key to automatically close the clamp arm and
raise the load arm.
Slowly move the drawbar to transport position. (Cylinder extended)
Affix the transport bar into the correct position, as shown.
NOTE: Check lighting system before travelling on the road
Before travelling on a public road, the operator must ensure that the
complete (tractor and machine) lighting system is in a fully functioning
condition.
WARNING: Complete a full inspection before travelling on the road
Ensure that a full inspection is completed every time before attempting
to go on to a public roadway, always think and practice safety!
NOTE: Control box
Before travelling on a public road, always make sure that the electronic
control box is switched off.