McHale Orbital - 8 Wrapper operation; Preparing the machine for wrapping

McHale Orbital Round Bale Wrapper
59
8
Wrapper operation
8.1 Preparing the machine for wrapping
1. Turn on oil supply.
2. Remove drawbar transport lock and put it into working position slot as shown.
3. Then, adjust drawbar to the desired working position. Do not operate the
hydraulic cylinder with the road transport lock in position.
4. Switch on electronic control box.
5. The machine is now ready to wrap.
WARNING: Keep out of the ‘Danger Zone’
Keep all persons, especially children, outside of the ‘Danger Zone’
during all machine operations! (See ‘Danger Zone’)
WARNING: Do not carry people or animals on the machine
The operator must ensure that no persons or animals are carried on the
machine at any time or are hidden under the machine (on the tractor
persons are only allowed to sit on the relevant seats).
ENVIRONMENT: Recycling of the plastic film
Respect the environment! Never dump or burn waste plastic film. It is
toxic! Always take waste materials to a recycling centre.