Medeli SP5500 - Function Menu; Tune

Function Menu
Option LCD Display Range Default
TUNE
000Tune
-50—050 000
BEAT
004Beat
000，002—009 004
SPLIT POINT
034Split pt
001
—
088 034
PEDAL ASSIGN
SOFT（001）
CHORUSLEVEL
000Cho Lev
000— 127
REVERB LEVEL
040Rvb Lev
000— 127
040
001 Ped Sost SOFT, SOST, MEM, ST/STOP
MIDI RECEIVE
ALL Receive
001 Transmit
001 016、ALL
001 016
—
—
ALL
001
MIDI TRANSMIT
000
Tune
Beat
20
Press [FUNCTION/NEXT] or [FUNCTION/BACK] button to enter the menu of function. The default
option of the menu is "TUNE". When you enter the menu next time, you will find the option is the same as
last time. Press [FUNCTION/NEXT] or [FUNCTION/BACK] button to select the option to be set.
Use [+/YES] / [-/NO] or the DIAL to set the parameter. The option and the parameters are as the follows:
If you don't press any button for 5 seconds after entering FUNCTION menu, it will quit this menu automatically.
The LCD displays the tune value. Use [+/YES] / [-/NO]
or DIAL to change the tune value. Its range is from -50
to 50 cents only by the right area of keyboard.
This function sets the pitch of entire keyboard by
steps of cents.
Pressing [+/YES] and [-/NO] together will set the TUNE
value back to its default setting.
FUNCTION
NEXTBACK
FUNCTION
NEXTBACK
- / NO + / YES
- / NO + / YES
The LCD displays the beat value.
This function sets the beat value ranging from 0, 2-9.
Use [+/YES] / [-/NO] or DIAL to change the BEAT value.
1
1
2
2
DZB63B0DQXDOB*BSGIDZB63B0DQXDOB*BSGI 