Record
Waiting for recording:
Press the [RECORD] button for the second time to enter
the record mode. The LCD lightens the REC flag, four beats
flashes synchronously to indicate waiting for recording.
At the same time an empty track will be selected to be
recorded automatically and relative track flag flashes (the
selection order is Melody1,Melody2...Melody5 and Accomp,
the Melody1 will be selected while all tracks are't empty ).
Press the [ACCOMP], [MELODY 1] ...[MELODY 5] button to
select the track you want to record.
Start recording:
When 4 beats on LCD flashes, press the [START/STOP]
button or play the keyboard to start recording.
when entering record mode, the old data of the selected track will
be overwritten.
STYLE
RECORD
STYLE
RECORD
STYLE
RECORD
STYLE
RECORD
Flash synchronously
Flash
Lighten
Darken
Flashing
RECORD
RECORD
RECORD
RECORD
PLAY/
STOP
PLAY/
STOP
PLAY/
STOP
PLAY/
STOP
MELODY
1
MELODY
1
MELODY
1
MELODY
1
MELODY
2
MELODY
2
MELODY
2
MELODY
2
MELODY
4
MELODY
4
MELODY
4
MELODY
4
MELODY
5
MELODY
5
MELODY
5
MELODY
5
ACCOMP
ACCOMP
ACCOMP
ACCOMP
MELODY
3
MELODY
3
MELODY
3
MELODY
3
START/
STOP
SYNC
STOP
SYNC
START
A
FADE
B
CHORD
MODE
INTRO/
ENDING
1
2
3
25
There are 3 states of choosing tracks in the light buttons:
Lighten, Flashing, Darken.
When the light of button is flashing, it indicates the flashing
track is the track chosen to be recorded.
When the light of button is lightened, it indicates there is
recorded material in this track for the selected song.
Material on this track will be played simultaneously while
recording for another track.
When the light of button is darkened, it indicates there's
no data in this track or there's data on this track but it's
forbid to play the recorded material while recording.
Press "Accomp" (or "Melody 1" to "Melody 5") to select
the desired track. The corresponding track will be
switched between the above three states.
Only 1 Melody track can be recorded at a time, whereas
"Accomp" track can be recorded with a Melody track
at the same time.
Style can only be recorded in "Accomp".
Choosing tracks
STYLE
RECORD
RECORD
PLAY/
STOP
MELODY
1
MELODY
2
MELODY
4
MELODY
5
ACCOMP
MELODY
3
START/
STOP
SYNC
STOP
SYNC
START
A
FADE
B
CHORD
MODE
INTRO/
ENDING
4
Stop recording:
Press the [RECORD] button for the third time to stop
recording.
If Accomp track is recording, press the [INTRO/ENDING]
button to stop recording after the ending accompaniment
is over.
If the capacity is full while recording, the recording will be
stopped automatically with the FULL display on LCD.
DZB63B0DQXDOB*BSGIDZB63B0DQXDOB*BSGI
To Next Page
Loading...
