211 Version 1.0
A: In case MT4205 is inaccessible, you can try to restore its factory default settings.
Please press the ―Reset‖ button and keep it pressed for over 7 seconds and the light
of STATUS will vanish. The LEDs will flash again when reset is successful.
3. Q: Why does MT4205 shut down unexpectedly?
A: Re-plug your power adapter. Then, check the STATUS indicator; if it is off, the
internal flash memory is damaged. For more help, please contact with your provider.
7.3 IP Address
1. Q: What is the default IP address of the router for LAN port?
A: The default IP address is 192.168.1.1 with subnet mask 255.255.255.0
2. Q: I don't know my WAN IP.
A: There are two ways to know.
Way 1: Check with your Internet Service Provider.
Way 2: Check the setting screen of MT4205. Click on Status & Log item to select
Network Configuration on the Main Menu. WAN IP is shown on the WAN
interface.
3. Q: How can I check whether I have static WAN IP Address?
A: Consult your ISP to confirm the information, or check Network Configuration in
MT4205’s Main Menu.
4. Q: Will the Router allow me to use my own public IPs and Domain, or do I have to
use the IPs provided by the Router?
A: Yes, the Router mode allows for customization of your public IPs and Domain.
7.4 OS Setting
1. Q: Why can’t my computer work online after connecting to 3.5G plus WLAN
Mobile Server Server Router?
To Next Page
Loading...